How to Serve: Tips & Techniques
Learn how to serve in Just Volleyball: toss control, approach timing, accuracy, underhand, float, curve, and spike serves with practical steps.
To serve in Just Volleyball, charge the serve input, aim with the cursor, and time your contact. For a basic overhand serve, toss the ball forward, jump, and hit when it is above your head. For a spike serve, send the toss farther forward, sprint-jump as it peaks, and contact it at the top of your jump.
A good Just Volleyball how-to-serve routine starts with four principles: toss, approach, timing, and accuracy. Once those are under control, you can add the underhand, overhand, float, curve, and spike serves to your game.
The Four Principles of Serving
Every serve depends on the same four pieces. If one part is off, the whole serve feels inconsistent.
| Principle | What It Controls | Simple Adjustment |
|---|---|---|
| Toss | How far and high the ball travels | Move the cursor away for a longer toss, closer for a shorter one |
| Approach | Momentum and jump height | Charge the jump, then hold sprint for a quicker approach |
| Timing | When you meet the ball | Jump as the ball reaches its peak and hit above your head |
| Accuracy | Target and pace | Aim deep or at the tape; cursor placement changes the ball’s speed |
The toss, approach, timing, and accuracy system is the foundation for every serve type below. Learn to control those four elements before chasing maximum power.
Toss and Approach Basics
The toss is controlled by your serve input and cursor distance. Charge using left click or the bump/receive button on your control scheme. A short tap produces a small pop. Holding the charge longer sends the ball higher and farther, with the cursor’s distance from your character setting the arc.
That means you should not use the same toss for every serve. An underhand serve needs only a short toss in front of you. A regular overhand serve works better with a moderate toss that stays controllable. A spike serve needs a longer toss so you have room to run and jump.
For the approach, get comfortable sprinting and jumping together. Charging the jump and then holding sprint creates a faster, more explosive movement than simply running forward and charging. Momentum matters because it feeds power into the hit.
Do not rush the whole sequence. A controlled toss and a committed jump are more useful than a wild toss followed by a panic swing.
How to Hit Each Serve Type
Underhand Serve
The underhand serve is the safest starting point for new players.
- Toss the ball just in front of your character.
- Keep the cursor close so the toss stays short.
- Do not jump.
- Aim the cursor at the opponent’s court and hit the ball.
Because there is no jump, the timing is simpler. Use this serve when you need a reliable way to get the ball over the net, especially while you are still learning the controls.
Overhand Serve
The overhand serve, sometimes treated like a basic jump serve, adds more pace than the underhand version.
- Use a short-to-moderate toss.
- Jump into the hit.
- Aim across the net before contact.
- Strike the ball when it is above your head.
The most common beginner error is leaving the cursor on your own side. That can send the ball out or straight down instead of into the opponent’s court. Make sure your aim is already across the net as you swing.
Curve Serve
The curve serve changes the ball’s flight path by adding sideways movement at contact. If you use WASD movement, hold A to curve left or D to curve right instead of only holding forward.
You can also combine forward and a side key for a tighter topspin curve. The ball bends more sharply, which can make it harder for a defender to read. The key is to aim at the opponent’s court while applying the side input at contact.
Use the curve serve as a change-up. It is not just about power; it is about making the passer move or react late.
Float Serve
A float serve removes the predictable forward spin and makes the ball drift awkwardly. To do it, tilt backward at contact to create the floating movement. In practice, that means holding back at the moment of contact instead of pushing forward.
Jump, aim at the opponent’s side, and hold back as you hit. The ball should float rather than drive flat and fast. Float serves are useful because they disrupt timing, even if they do not look as powerful as a spike serve.
Do not expect every float to behave the same way. The unpredictable movement is the point.
Spike Serve
The spike serve is the most aggressive serve in the game, and it requires the cleanest timing. Here is a reliable sequence:
- Toss far forward. Hold the serve input long enough to send the ball out in front, with your cursor at maximum distance.
- Wait for the ball to reach its peak. Do not rush forward before the toss has peaked.
- Sprint-jump toward the ball. Charge the jump, hold sprint, and launch as the ball begins to come down.
- Contact above your head. Charge your hit as the ball arrives around head height. The hit marker turning blue means you are lined up well.
- Aim deep or at the tape. Keep the cursor just above the back line for pace, or aim near the tape to mix up the serve.
The timing is strict. If you jump too early, you will arrive before the ball. If you wait too long, the ball will drop below your ideal contact point. Practice the toss-peak-jump rhythm until it feels automatic.
If you can charge the hit longer without delaying contact, you will add more power. A clean hit with slightly less charge is usually better than a rushed hit at full power.
Accuracy, Pace, and Tape Serves
Accuracy is more than just getting the ball over the net. Cursor placement changes both the target and the speed of the serve. Aiming deeper into the opponent’s court, especially toward the back boundary with the cursor slightly above it, tends to produce a faster ball. Aiming nearer the net generally produces a slower serve.
That gives you two useful modes: a deep, fast serve that pressures the passer, or a shorter, slower serve that changes their timing. Mixing both is more effective than hitting the same speed every time.
The tape is the white top of the net. Aiming the cursor on or just below the tape can produce a serve that clips the top and drops in. This is a strong mix-up in smaller modes such as 1v1 and 2v2, and it can also work in 3v3. In 6v6, a defender is often already close to the tape, so the payoff is lower.
Use tape serves as a surprise, not as your only plan. If the opponent starts cheating forward, a deep serve can punish them.
Common Serving Mistakes and Fixes
- Toss is too short or too long: Adjust cursor distance before changing anything else. The cursor controls the toss length.
- Ball goes out or into the net: Check your aim. The cursor should be on the opponent’s side before contact.
- Jump feels late or early: Wait for the toss to peak, then start the sprint-jump. For regular overhand serves, contact above the head.
- Approach feels slow: Charge the jump, then hold sprint. Do not only run forward and charge.
- Curve or float does not work: Use the correct contact input. Curve uses a side key; float uses back at contact.
- Serves become predictable: Mix deep pace, short placement, and tape serves instead of hitting the same shot every time.
A Simple Practice Routine
Start with 10 underhand serves using a short toss and no jump. Focus on aiming across the net.
Then hit 10 overhand serves with a controlled toss. Your goal is a clean contact above the head, not maximum power.
Next, practice 10 spike serves. Toss far forward, wait for the peak, sprint-jump, and hit above your head. Do not worry about ace placement yet; build the timing first.
Finish with 10 mixed serves: five aimed deep, five aimed at the tape or a short target. Add curve or float serves once the basic motion feels consistent.
FAQ
How do I do a float serve in Just Volleyball?
Jump, aim at the opponent’s court, and hold back at contact. Your character should tilt backward, and the ball should float instead of driving forward with normal spin.
Why does my spike serve miss?
The usual causes are tossing too short, jumping before the ball peaks, or leaving the cursor on your own side. Send the toss farther forward, wait for the peak, and aim across the net before swinging.
Which serve should I learn first?
Start with the underhand serve for consistency, then move to the overhand serve. Add the float and curve once you can control the toss and contact point. The spike serve comes last because it demands the tightest timing.
Related Guides
How to Float Serve: Timing & Tips
Learn how to hit a Just Volleyball float serve by tilting backward at ball impact, timing the contact, and keeping it separate from a power serve.
How to Spike: Timing and Power
Learn how to spike in Just Volleyball: time the set, charge at the apex, aim with tilt, and beat blockers with smarter shot choices.
Libero Defense Guide: Bump and Dive
Learn how to play libero in Just Volleyball: bump, dive, strafe, read hitters, aim passes to the setter, and save rallies without wasting stamina.
Setter Guide: Controls and Set Calls
Master Just Volleyball setting: tap for high sets, charge quick sets, aim with your cursor, and run common calls like four, nine, and pipe.